• Information Request
  • Privacy



    Information pursuant to Legislative decree N. 196/2003 on protection of Privacy
    In compliance with current laws, we would like to inform you that in accordance with Legislative Decree n.196 of 30 June 2003 (and subsequent amendments) the data you provide shall be processed always taking into account the obligations and in compliance with the laws indicated above. Pursuant to article 4, paragraph 1, letter A, of Legislative Decree n. 196 of 30 June 2003 (commonly referred to as the “Privacy Code”) processing shall be considered as: “any operation or set of operations which is performed upon personal data, whether or not by automatic means, such as collection, recording, organization, storage, adaptation or alteration, retrieval, consultation, use, disclosure by transmission, dissemination or otherwise making available, alignment or combination, blocking, erasure or destruction”.

    Data controller
    The data controller of the data you provide is BTS S.p.A. with headquarters in viale Forlanini 40, 20024 Garbagnate Milanese (MI).
    Purposes of the processing
    In accordance with Legislative Decree n. 196 of 30 October 2004, we would like to inform you that by filling out and submitting this form the following will be accepted: The data collected by means of this form shall be used by BTS S.p.A.:
    1. to provide education and information materials (newsletters) to subscribers who entered their email address;
    2. to perform, in general, the obligations required by law.

    Moreover, we would like to inform you that the data you provide shall also be used according to the procedures and purposes described hereunder in points 3, 4, and 5:
    to elaborate statistical and market studies and research;

    3. to send advertising and/or informative material on new products and services of BTS S.p.A. and/or third parties with which BTS S.p.A. has signed commercial and/or marketing agreements;
    4. to send communications and/or commercial information on the products and services of BTS S.p.A. and/or third parties with which BTS S.p.A. has signed commercial and/or marketing agreements;
    5. Education and/or information (newsletters) materials shall be sent free of charge to the email address indicated.

    Data processing procedures
    Personal data shall be processed using suitable tools to guarantee its security and confidentiality, with and without the help of automatic means to store, manage, and transmit the data.
    At any time, you may cancel the consent given and/or object to the processing of your data, by sending notice to the data controller of your personal data by registered letter, fax, or email to our addresses. In compliance with the provisions of article 7 and 8 of Legislative Decree n. 196 of 30 June 2003, we would like to inform you that you are entitled to:
    - know the existence of your personal data, which must be made available in an intelligible form;
    - know the origin of your personal data;
    - know the purposes and procedures of the processing;
    - know the logic applied in the event of processing with the use of electronic instruments;
    - know the identification information of the data controller;
    - know the subjects or the categories of subjects to whom the personal data can be communicated;
    - updating, rectification, or integration of your personal data;
    - cancellation, transformation into anonymous form or block your data, for which processing has not been properly authorised.
    - to object to the processing of data for legitimate reasons, even if pertinent to the purposes of their collection;
    - to object to the processing of data required for sending advertising material or for the purposes of commercial information.

    For any communication, request and other, the interested parties can contact the Data Controller of personal data by writing to BTS S.p.A. viale Forlanini 40, 20024 Garbagnate Milanese (MI) – to the attention of the Data Processor Mr. Fabio Rossi.
    Please wait...

BTS TMJOINT

The solution for improving the diagnosis and correction of occlusal interferences: synchromyography of neuromuscular stability analysis.



BTS TMJOINT performs a static and dynamic analysis of the masticatory performance combined to the traditional mechanical and morphological evaluation systems and supplies all the information needed to plan orthodontic therapies and judge their results. Through BTS TMJOINT, neuromuscular stability is an additional, relevant element used to improve prosthesis and rehabilitation therapies. BTS TMJOINT uses synchromyography analysis to perform a functional evaluation of dental occlusion referring to the indexes published in scientific journals.

BTS TMJOINT and a Bite
How it works
Four different probes are applied to the patient’s temporal and masseter muscles: the patient is asked to clench for 5 seconds, the task is repeated twice, with and without cotton rolls.
The results appearing right away in a graphic representation are clear and easy to understand for both physician and patient.
The doctor can easily intervene without taking the probes off the patient’s face, being able in such way to perform an additional post-treatment evaluation. This procedure can be repeated over and over during the same treatment session, leading to better results of the treatment undergone by the patient.
Applications
Oral rehabilitation: choice of treatment, evaluation of fixed and removable dental prosthesis
TMJ: Pre and post-splint, cranio-cervical-mandibular disorders from malocclusion
Orthodontics: Pre e post-treatment
Documentation and research: Treatment validation, biomechanics research
Forensic testing: Pexpertise, court evidence

Protocols
POC 4

Through a quick 5 second clenching test, in which the activities of the masseter and anterior temporal muscles, right and left are acquired, it provides, as an immediate result, a percentage overlapping coefficient – POC (index of the symmetric distribution of the muscular activity determined by the occlusion) and a torque coefficient – TORS (index to estimate the possible presence of mandibular torque), which makes it possible to establish the role of occlusion on muscular balance. A third index, called IMPACT, allows to evaluate the muscular work, providing information about the occlusal vertical dimension.

POC 6
This protocol adds to the previous 2 capture probes for calculating the indices related to the sternocleidomastoid muscle, right and left. The effects of the teeth touching, on the neck muscles are evaluated.

CHEWING
It analyses the neuromuscular coordination during mastication. The masticatory frequency, the Lissajous curve, and indices of muscle symmetry are calculated.

Models and Technical Specifications

Technical features
Wireless probes
(italian patent
pending)
4
Surface
electrodes
Variable geometry electrodes with mounting clip
Resolution16bit
Acquisition
Frequency
1kHz
Data
Transmission
Wireless IEEE802.15.4 (probes – USB receiver)
Battery Rechargeable with proprietary charger (clip connector) – lithium ion
Autonomy 8h battery life for non-stop recording, several days in “Stand-by” mode, several months in “Deep sleep” mode
Status LED Acquisition/stand-by mode and low battery
Weight About 10 grams including battery
Size 41,5×24,8x14mm mother electrode – Ø 16x12mm satellite 
Receiver connection USB 
Certification Classe IIa
Software BTS Dental Contact Analyzer

Components and Accessories
Standard equipment:
  • USB receiver
  • 4 wireless EMG probes
  • Transport bag
  • Probes charger
  • BTS Dental Contact Analyzer Software
  • POC 4 Protocol
Add-on:
  • Workstation
  • CHEWING Protocol
Technical features
Wireless probes
(italian patent
pending)
6
Surface
electrodes
Variable geometry electrodes with mounting clip
Resolution16bit
Acquisition
Frequency
1kHz
Data
Transmission
Wireless IEEE802.15.4 (probes – USB receiver)
Battery Rechargeable with proprietary charger (clip connector) – lithium ion
Autonomy 8h battery life for non-stop recording, several days in “Stand-by” mode, several months in “Deep sleep” mode
Status LED Acquisition/stand-by mode and low battery
Weight About 10 grams including battery
Size 41,5×24,8x14mm mother electrode – Ø 16x12mm satellite 
Receiver connection USB 
Certification Classe IIa
Software BTS Dental Contact Analyzer
Components and Accessories
Standard equipment:
  • USB receiver
  • 6 wireless EMG probes
  • Transport bag
  • Probes charger
  • BTS Dental Contact Analyzer Software
  • POC 6 Protocol
Opzioni:
  • Workstation
  • CHEWING Protocol