The EMG probes able to acquire the signal even underwater

water proof

water proof

under water

under water

sweat proof

sweat proof

A probe with no more limits

FREEEMG 1000 H2O is the evolution of BTS technology for EMG analysis specially designed for water measurement.

Thanks to a special protective gel, the electronic components included in the case are completely waterproof, and allow the immersion of the probe in water up to a depth of 3 meters (IP68 classification).

SPORT FIELD

Water sports, indoor training and post-injury recovery

REHABILITATION

neuromotor and orthopedic

How does it works

Clinical/rehabilitative field:

  • Neuromotor aquatic rehabilitation
  • Post-injury aquatic rehabilitation

 

Sport field:

  • Analysis of the motor gesture in all water sports, in indoor training
  • Application in sports with sweat resistance

As simple as drinking a glass of water

The subject preparation requires only a few minutes and the special probe technology allows a completely safe immersion in water.

The probe is applied with pre-gelled electrodes and the signal is acquired on the onboard memory of the probe without any loss of the acquired data.

EMG Probes

wdt_IDColumn1Column2
1Surface ElectrodesVariable geometry underwater electrodes with snap connectors
2Resolution16bit
3Acquisition Frequency1kHz
4Data TransmissionWireless IEEE 802.15.4
5BatteryLiPo battery, rechargeable with proprietary charger
6Battery LifeOver 6 hours of continuous acquisition
9On-board MemorySolid-state memory - up to 2 hours
11WeightAbout 18 grams - battery included
12Dimensions41,5×24,8x14mm mother electrode – Ø 16x12mm satellite electrode
13CertificationCE Class IIa, FDA registration

USB Receiver

wdt_IDNew columnNew column
1PC ConnectionUSB 2.0
2Manageable ProbesUp to 10 wireless probes per receiving unit
3Weight80 gr
4Dimension80mm L x 45.5mm W x 14.4mm H (3.14in L x 1.79in W x 0.57in H)
5Data TransmissionWireless IEEE 802.15.4
wdt_IDComponents
7Up to 20 Probes
5Up to 2 USB Receiver (each receiver manage up to 10 wireless probes)
6Charger
4Transport bag
8EMG-Analyzer software

Underwater accessories

wdt_IDAdd-on
6G-SENSOR H2O (Underwater Inertial Sensor)
7Functional Protocols (*G-SENSOR H2O required)

Standard accessories

wdt_IDAdd-on
1Footswitch Kit
2Electrogoniometer Kit
3Wireless Isokinetic Kit
4Workstation
8VIXTA video system (up to 4 videocameras)
9INTEGRA (Analog Output Receiver)
11I-PORT Expander (Analog Input Receiver)
12Trigger Box
13BTS SDK (Development Tool)

Mehr Informationen anfordern